FACOT liquid for cleaning DISINEX heating systems

FACOT liquid for cleaning DISINEX heating systems

An acid-based liquid that can be used for many applications, such as: removing rust and corrosion from metal structures, to remove calcium or silica particles from water pipes or in boilers and heat exchangers.

APPLICATION:

Dilute the liquid in a plastic container according to the specified ratio. We apply the liquid directly to the heating system or to the heat exchanger using a pressure pump. The liquid is effective until it changes color from the initial pink to orange-yellow. If the liquid does not change color and carbon dioxide bubbles stop forming, the removal of impurities is complete. Due to the formation of gas, it is necessary to work with open venting on the pump. After application, the system or heat exchanger must be neutralized with NEUTRO fluid.

DOSAGE:

Dilute the liquid 10: 1 or 5: 1 (10 parts DISINEX and 1 part water)

TECHNICAL DATA:

• Color: pink
• pH (10% solution) 1.2 + -0.2
• Specific gravity: 1.160 ± 0.010 g / cm³
• Boiling point: 85°C
• Total water solubility YES

SAFETY DATA SHEET:

• Precautions for handling corrosive chemicals that act to prevent skin contact and inhalation. Store in the original package in a cool, dry place. R34 - causes burns, R37 - irritates the respiratory tract, S1 / 2 - keep closed and out of reach of children, S36 / 37/39 use suitable protective clothing, goggles and gloves

INGREDIENTS:

• hydrochloric acid, sulfuric acid, water and dyes